TPS 2500 S DUAL-Zinfo Consulting Services,lnc.

Product Details

TPS 2500 S DUAL

	Company name：Zinfo Consulting Services,lnc.
	Hot line：(703)2006590
	Company fax：(703)4217736
	Company Mobile：
	Company Address：Tianjin Huayuan,#2 Huatian Dao 4031
	Website Service：

Multi-sensor Thermal Constants Analyser

The Hot Disk TPS 2500 S Dual is a state of the art quality control instrument. By testing the thermal conductivity of a sample or device, even the smallest structural or compositional deviations are easy to detect. The TPS 2500 S features the ability to perform several simultaneous test, while retaining the accuracy and versatility of the normal TPS 2500 S. Each unit is equipped with two sensor positions, and the Dual units can be modularly linked in parallel, thus allowing the complete system to be tailored to your testing requirements. The ability to test several samples or many positions on one larger device, at once, makes the TPS 2500 S ideal for incorporation in a production line. The TPS 2500 S Dual meets ISO Standard 22007-2.

The TPS technique is used in more than 600 laboratories today, and is highly appreciated for its ability to simultaneously determine thermal conductivity, thermal diffusivity and specific heat capacity from a single measurement. The technique allows for very flexible sample geometries and sample preparation is minimal.

Optional software modules allows the instrument to be used in special applications, such as measurements of thin films, coatings or adhesive layers (Thin Film module), high-conducting sheets or slabs (Slab module), and anisotropic samples or layered structures (Anisotropic module) – important applications in e.g. the electronics, automotive, aerospace, nuclear and chemical industries.

The test & analysis software for the TPS 2500 S Dual incorporates tools for automated measurements. The software also incorporates tools for exporting results to 3rd-party software (MS Excel), for additional processing or statistical analysis.

Specifications

Thermal Conductivity	0.005 to 1200 W/m/K.
Thermal Diffusivity	0.1 to 700 mm²/s.
Specific Heat Capacity	Up to 5 MJ/m³K.
Measurement Time	1 to 1280 seconds.
Reproducibility	Typically better than 1 %.
Accuracy	Better than 5 %.
Smallest Sample Dimensions	0.5 mm × 2 mm diameter or square for bulk testing. 0.1 mm × 10 mm diameter or square for slab testing. 10 mm × 5 mm diameter or square for one-dimensional testing.
Sensor Types Available	All Kapton sensors. All Mica sensors. All Teflon sensors.
Meets ISO Standard 22007-2.

Key Features

Quality control: The accurate, reproducible and fast testing results achieved using a TPS 2500 S Dual makes it a prime candidate for quality control of raw materials or devices.

Multiple Sensors: The TPS 2500 S Dual operates a wide variety of Hot Disk sensors suitable for different materials and applications. Each unit carrying two sensors, the entire system can incorporate as many units as needed to fit your measurement needs.

Single-sided measurements: The TPS technique admits accurate single-sided measurements, where the sensor is simply pressed against the sample to be tested. This trait makes it easy to automatise testing, e.g. in a production line.

Everything to get you started: The TPS 2500 S Dual system includes everything needed to start performing measurements, including installation and on-site training.

Optional Software Modules:In addition to the STANDARD MODULE, optional software modules for SLAB, THIN FILM, ANISOTROPIC, ONE-DIMENSIONAL and LOW-DENSITY/HIGHLY-INSULATING SAMPLES. Modules for determining SPECIFIC HEAT CAPACITY and to perform STRUCTURAL PROBING are also available.

返回 >>